HP Comware 5 Debug Manual Vol 2

Field
Description
pvc unavailable The PVC is not configured or is inactive.
switch unavailable No switching table is available.
map unavailable No map is available.
Examples
# Enable frame relay packet debugging on Router A and Router B. Output similar to the following
example is generated when Router A and Router B are connected through FR.
<RouterA> debugging fr mfr packet
*0.415900015 RouterA FR/7/debug8: PACKET: Serial2/0 (out), dlci 200
*0.415900015 RouterA FR/7/debug8: datagram len = 88, pkt type = IP
// A packet was sent out DLCI 200 on Serial2/0.
*0.415900031 RouterA FR/7/debug8: PACKET: Serial2/0 (in), dlci 200
*0.415900031 RouterA FR/7/debug8: datagram len = 88, pkt type = IP
// A packet was received on DLCI 200 on Serial2/0.
<RouterB> debugging fr mfr packet
*0.415918391 RouterB FR/7/debug8: PACKET: Serial2/0 (in), dlci 200
*0.415918391 RouterB FR/7/debug8: datagram len = 88, pkt type = IP
// A packet was received on DLCI 200 on Serial2/0.
*0.415918391 RouterB FR/7/debug8: PACKET: Serial2/0 (out), dlci 200
*0.415918391 RouterB FR/7/debug8: datagram len = 88, pkt type = IP
// A packet was sent out DLCI 200 on Serial2/0.
debugging pppofr
Use debugging pppofr to enable a type of PPPoFR debugging for the specified virtual template interface
or globally.
Use undo debugging pppofr to disable a type of debugging for PPPoFR.
Syntax
debugging pppofr [ interface virtual-template number ] { all | event | packet }
undo debugging pppofr [ interface virtual-template number ] { all | event | packet }
Default
PPPoFR debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
number: Specifies a virtual template interface by its number.
all: All types of debugging for PPP over Frame Relay (PPPoFR).
event: Event debugging for PPPoFR events.
80