HP Comware 5 Debug Manual Vol 2

// The join timer expired on Ethernet 1/1.
debugging gvrp event
Use debugging gvrp event to enable GVRP event debugging.
Use undo debugging gvrp event to disable GVRP event debugging.
Syntax
debugging gvrp event
undo debugging gvrp event
Default
GVRP event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 2 describes output fields and messages for the debugging gvrp event command.
Table 70 Output from the debugging gvrp event command
Field
Description
GVRP: Wrong VLAN Id = n to create The VLAN ID is wrong when a VLAN is created.
GVRP: Number of static VLANs for port portName = n The number of static VLANs on a specific port.
Examples
# Enable GVRP event debugging.
<Sysname> debugging gvrp event
*0.3440813 Sysname GARP/7/Generic msg:
GVRP: Number of static VLANs for port Etherne1/1 = 1
// The number of static VLANs is 1 on Ethernet 1/1.
debugging gvrp packet
Use debugging gvrp packet to enable GVRP packet debugging.
Use undo debugging gvrp packet to disable GVRP packet debugging.
Syntax
debugging gvrp packet [ interface interface-type interface-number ]
undo debugging gvrp packet [ interface interface-type interface-number ]
Default
GVRP packet debugging is disabled.
Views
User view
90