HP Comware 5 Debug Manual Vol 3

*0.21838588 Sysname MRM/7/PACKET:
(public net):Received MFIB information(NOCACHE) for (1.1.1.108, 235.1.1.1) with incoming
interface index 0x30f0188(C22380)
// The MRM received a multicast packet (1.1.1.10 8 , 235 .1.1.1) for an unknown group address from the
MFIB on the interface with the index number of 0x30F0188.
*0.22048588 Sysname MRM/7/PACKET:
(public net):Received MFIB information(INACTIVE) for (1.1.1.108, 235.1.1.1) (C22502)
// The multicast forwarding entry of (1.1.1.10 8 , 235 .1.1.1) transited to INACTIVE state 210 seconds after
the multicast source stopped sending data stream.
# Enable MRM route debugging on the public network.
<Sysname> debugging mrm route
*0.703622 Sysname MRM/7/ROUTE:
(public net):SG_INCLUDE: get a new route for (3.3.3.156, 225.0.0.1)(C155414)
// The MRM found a new route for the entry (3.3.3.156, 225.0.0.1).
*0.703622 Sysname MRM/7/ROUTE:
(public net):SG_INCLUDE: 100.1.1.1 is reachable, move (3.3.3.156, 225.0.0.1) include
interest from null list(C155426)
// The route to 100.1.1.1 is reachable and the record for the entry (3.3.3.156, 225.0.0.1) was moved from
the null list.
*0.21838588 Sysname MRM/7/ROUTE:
Received a creation alert for (3.3.3.156, 225.0.0.1)(C181103)
// The MRM received a creation alert for multicast forwarding entry (3.3.3.156, 225.0.0.1).
debugging mtracert
Use debugging mtracert to enable multicast traceroute debugging.
Use undo debugging mtracert to disable multicast traceroute debugging.
Syntax
debugging mtracert { all | event | packet }
undo debugging mtracert { all | event | packet }
Default
Multicast traceroute debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of multicast traceroute debugging.
event: Specifies multicast traceroute event debugging.
packet: Specifies multicast traceroute packet debugging.
96