HP Comware 5 Debug Manual Vol 3

Field
Description
MacAuth is configuring or already disabled ,can't
add src drop mac .
MAC authentication is under configuration or has
been disabled. The device cannot add the MAC
address to the MAC address table that contains
blocked MAC addresses.
Broadcast send a MAC address syn add msg
The device broadcast the synchronization message
for a new MAC.
Broadcast send a new slot inserted notify msg ,new
slot is :SlotID
The device broadcast the message to notify the
insertion of a new card. (Distributed
devices/distributed IRF devices.)
The device broadcast the message to notify the
insertion of a new subordinate device. (Centralized
IRF devices.)
Receive broadcast kickoff preUser IPC request.
The MAC authentication module received broadcast
IPC request to remove duplicated MAC authentication
users.
find auth by index fail...
The device failed to find MAC authentication
resources based on the user index.
NOT FOUND MacAddress, Vlan:VlanID in
MACAUTH blocked List.
The MAC authentication module failed to find the
MAC address of the specified VLAN in the quiet MAC
address table.
FOUND MacAddress, Vlan: VlanID in MACAUTH
blocked List.
The MAC authentication module found the MAC
addresses of the specified VLAN in the quiet MAC
address table.
Send request to driver to get port PortSec info for
IfIndex =IfIndex,cmd = CmdType
The MAC authentication module sent a request to the
driver. The module requested port security information
of a port.
Get Port Portsec info for IfIndex =IfIndex, cmd =
CmdType, return code = ErrCode
The MAC authentication module received port
security information of the port.
IPCMsg: Sync Slot Insert Information msg: recv data is
null!
Card insertion synchronization message. The
received data is null. (Distributed devices/distributed
IRF devices.)
Member device insertion synchronization message.
The received data is null. (Centralized IRF devices.)
IPCMsg: Sync Slot Insert Information msg: recv data
length is wrong!
Card insertion synchronization message. The
received data length is incorrect. (Distributed
devices.)
Member device insertion synchronization message.
The received data length is incorrect. (Centralized IRF
devices.)
3