HP Comware 5 Debug Manual Vol 3

*Jan 23 15:52:15:02 2007 Sysname MTUNNEL/7/debug:
mgre_encapsulate: Src addr 11.11.11.11.
// The multicast tunnel source address 11.11.11.11 is used for packet encapsulation.
*Jan 23 15:52:15:02 2007 Sysname MTUNNEL/7/debug:
mgre_encapsulate: Grp addr 235.0.0.1.
// The default group IP address 235.0.0.1 of the multicast tunnel is used for packet encapsulation.
*Jan 23 15:52:15:02 2007 Sysname MTUNNEL/7/debug:
mgre_encapsulate: Encapsulate successfully.
// The packet was successfully encapsulated.
*Jan 23 15:52:15:02 2007 Sysname MTUNNEL/7/debug:
mgre_Decaps: Decapsulate successfully.
// The packet was successfully decapsulated.
# Enable multicast tunnel IPC message debugging. When a multicast tunnel is created between two
distributed PE devices, output similar to the following example is generated:
<Sysname> debugging mtunnel ipc
*Apr 10 14:25:04:106 2007 PE1 MTUNNEL/7/debug:
mtunnel_ipc: No.1 board, the Recive-Msg length of recive-Msg is wrong.
// The RPC message received from interface board 1 has an incorrect length.
106