HP Comware 5 Debug Manual Vol 3

Field
Description
SlotInsert, Portsec not enabled, macauth
enabled ,enable macauth on new slot!
When a new card was inserted, port security was not
enabled and MAC authentication was enabled on the
card. After the insertion, MAC authentication is
enabled on the new card. (Distributed devices.)
When a new member device was inserted, port
security was not enabled and MAC authentication
was enabled on the device. After the insertion, MAC
authentication is enabled on the new member device.
(Centralized IRF devices.)
SlotInsert, Portsec enabled or macauth not
enabled ,enable macauth on new slot!
When a new card was inserted, port security was
enabled or MAC authentication was not enabled on
the card. After the insertion, MAC authentication is
enabled on the new card. (Distributed devices.)
When a new member device was inserted, port
security was enabled or MAC authentication was not
enabled on the device. After the insertion, MAC
authentication is enabled on the new member device.
(Centralized IRF devices.)
Fail to enable mac_auth for driver's err
The system failed to enable MAC authentication
because of driver error.
Fail to disable mac_auth for driver's err
The system failed to disable MAC authentication
because of driver error.
Receive reset drv msg .
The MAC authentication module received a message
to reset the driver.
Receive clear drv msg
The MAC authentication module received a message
to clear the driver.
waiting users off-line.
The MAC authentication module is waiting for users to
go offline.
clear mac-auth drv .
The MAC authentication module cleared the MAC
authentication driver.
Port leave from Vlan, but user is leaving GuestVLAN,
need NOT cut user!!!
The interface has left the guest VLAN, and the user is
being removed from the guest VLAN. In this case, it is
not required to force the user to go offline.
Port leave from Vlan, cut user!!!
The interface has left guest VLAN. The user went
offline forcibly.
Added an MACAUTH MGV entry for MacAddress:
IfIndex =IfIndex Guest-Vlan=VlanID
An MGV entry for MAC authentication was added:
• MacAddress—MAC address added to the MGV
entry.
• IfIndex—Port index.
• Guest-Vlan—Guest VLAN ID.
MGV traffic timer triggered MAC authentication:
MAC= MacAddress , IfIndex =IfIndex ,
Guest-Vlan=VlanID, InitVlan = InitVlan
MGV traffic timer triggered MAC authentication.
• MAC—MAC address that triggered the MAC
authentication.
• IfIndex—Port index.
• Guest-Vlan—Guest VLAN ID.
• InitVlan—Initial VLAN to which the port was
assigned before it was added to the guest VLAN.
4