HP Comware 5 Debug Manual Vol 3

NAT debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging nat
Use debugging nat to enable NAT debugging.
Use undo debugging nat to disable NAT debugging.
Syntax
debugging nat { alg | event | packet } [ interface interface-type interface-number ]
undo debugging nat { alg | event | packet } [ interface interface-type
interface-number ]
Default
NAT debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
alg: Specifies ALG debugging. Support for this keyword depends on the device model.
event: Specifies event debugging.
packet: Specifies packet debugging.
interface interface-type interface-number: Specifies NAT packet debugging for a specified interface.
Usage guidelines
Table 1 describes output fields and messages for the debugging nat alg command.
Table 85 Output from the debugging nat alg command
Field
Description
Ftp Packet To Svr NAT ALG processes FTP packets sent to the server.
(interface-type interface-number-out :)
The outbound packet is serviced by NAT on interface
interface-type interface-number.
Find a Normal Ftp CMD ALG received a normal FTP command.
Ftp Packet To Client NAT ALG processes FTP packets sent to the client.
(interface-type interface-number-in :)
The inbound packet is serviced by NAT on interface
interface-type interface-number.
113