HP Comware 5 Debug Manual Vol 3

ND attack defense debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ipv6 nd detection packet
Use debugging ipv6 nd detection packet to enable ND packet debugging for ND detection.
Use undo debugging ipv6 nd detection packet to disable ND packet debugging for ND detection.
Syntax
debugging ipv6 nd detection packet
undo debugging ipv6 nd detection packet
Default
ND packet debugging of ND detection is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 1 describes the output fields and messages for the debugging ipv6 nd detection packet command.
Table 89 debugging ipv6 nd detection packet command output
Field
Description
Received: Port Port that received an ND packet.
VLAN VLAN that received the packet.
DstMACInEth
Destination MAC address in the Ethernet frame header of the
packet.
SrcMACInEth Source MAC address in the Ethernet frame header of the packet.
PktType Type of the packet.
SrcIP Source IPv6 address of the packet.
DstIP Destination IPv6 address of the packet.
TrgIP
Target address carried in an NS packet, an NA packet, or a
redirect packet.
RRDstIP Destination address carried in a redirect packet.
LLA
MAC address in the source link-layer address option field of the
ND packet.
121