HP Comware 5 Debug Manual Vol 3

NetStream debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ip netstream event
Use debugging ip netstream event to enable NetStream event debugging.
Use undo debugging ip netstream event to disable NetStream event debugging.
Syntax
debugging ip netstream event
undo debugging ip netstream event
Default
NetStream event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 1 describes the output fields and messages for the debugging ip netstream event command.
Table 90 Output from the debugging ip netstream event command
Field
Description
IP Stream Create cache NetStream created IP stream cache.
IP Stream Destroy cache NetStream cleared IP stream cache.
IP Stream Reset cache by force NetStream reset IP stream cache.
IP Stream Malloc from system NetStream allocated memory for IP stream cache.
IP Stream Add to active list NetStream added an IP stream to the active list.
IP Stream Add to age list NetStream added an IP stream to the aged list.
IP Stream Add a stream (Now 1 active streams)
NetStream added an IP stream entry (a total of one
active entry).
IP Stream Update a stream NetStream updated an IP stream entry.
IP Stream Age a stream (tcp fin or rst) An IP stream entry (TCP FIN or RST) aged out.
IP Stream Age a stream (active age or overflow)
An IP stream entry aged out due to active flow aging
or entry overflow.
IP Stream Age 1 streams (inactive timeout)
An IP stream entry aged out due to inactive flow
aging.
IP Stream Age 1 streams (age all) An IP stream entry aged out due to forced aging.
123