HP Comware 5 Debug Manual Vol 3

NQA debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging nqa
Use debugging nqa to enable NQA debugging.
Use undo debugging nqa to disable NQA debugging.
Syntax
debugging nqa { all | error | event | reaction }
undo debugging nqa { all | error | event | reaction }
Default
NQA debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Enables all types of debugging for NQA.
error: Enables NQA error debugging.
event: Enables NQA event debugging.
reaction: Enables debugging for NQA collaboration entries.
Usage guidelines
Table 1 describes output fields and messages for the debugging nqa event command.
Table 92 Output from the debugging nqa event command
• Field • Description
• FTP test (owner-tag): state.
• State of the FTP operation:
• New user logging in.
• Data connection created.
• Ready for file transfer.
• File transfer completed.
• Data connection closed.
• Begin time • Time when the NQA client began to obtain an IP address.
• End time • Time when the NQA client obtained an IP address.
Table 2 describes output fields and messages for the debugging nqa reaction command.
130