HP Comware 5 Debug Manual Vol 3

MAC-in-MAC debugging commands
The MAC-in-MAC module name is identified as "MINM" in debugging messages.
The output description tables in this document only contain fields and messages that require an
explanation.
debugging minm
Use debugging minm to enable debugging for MAC-in-MAC.
Use undo debugging minm to disable debugging for MAC-in-MAC.
Syntax
debugging minm { all | error | event | packet }
undo debugging minm { all | error | event | packet }
Default
Debugging for MAC-in-MAC is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging for MAC-in-MAC.
error: MAC-in-MAC error debugging.
event: MAC-in-MAC event debugging.
packet: MAC-in-MAC frame debugging.
Usage guidelines
Table 1 describes the output fields and messages for the debugging minm error command.
Table 3 Output from the debugging minm error command
a. Field
b. Description
c.
The ISID of this packet is
not configured
d.
The I-SID of the MAC-in-MAC frame is
not as configured.
e.
Failed to set driver
f.
MINM failed to issue the configuration
to the driver.
g.
Failed to process BMAC
aging event
h.
MINM failed to age the B-MAC entry.
i.
Failed to create VSI, when
processing slot in
j.
MINM failed to create a VSI when a
board was plugged.
6