HP Comware 5 Debug Manual Vol 3

NTP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ntp-service
Use debugging ntp-service to enable NTP debugging.
Use undo debugging ntp-service to disable NTP debugging.
Syntax
debugging ntp-service { access | adjustment | all | authentication | event | filter | packet | parameter
| refclock | selection | synchronization | validity }
undo debugging ntp-service { access | adjustment | all | authentication | event | filter | packet |
parameter | refclock | selection | synchronization | validity }
Default
All NTP debugging functions are disabled.
Views
User view
Default command level
1: Monitor level
Parameters
access: NTP access control debugging.
adjustment: NTP clock adjustment debugging.
all: All types of debugging for NTP.
authentication: NTP authentication debugging.
event: NTP event debugging.
filter: NTP filter debugging.
packet: NTP packet debugging.
parameter: Debugging for NTP clock parameters.
refclock: Debugging for NTP reference clock.
selection: Debugging for NTP clock selection information.
synchronization: Debugging for NTP clock synchronization.
validity: Debugging for NTP remote host validity.
Usage guidelines
Table 1 describes output fields and messages for the debugging ntp-service adjustment command.
133