HP Comware 5 Debug Manual Vol 3

Table 94 Output from the debugging ntp-service adjustment command
Field
Description
NTP: gradual systime NTP is gradually adjusting the system time.
NTP: step systime NTP is adjusting the system time in one step.
adj: string Time that is adjusted in the current time adjustment operation.
residual: string Remaining value for the most recent time adjustment.
offset: string Offset for step adjustment.
Table 2 describes output fields and messages for the debugging ntp-service authentication command.
Table 95 Output from the debugging ntp-service authentication command
Field
Description
session_key Session key.
srcadr: string Source IP address.
dstadr: string Destination IP address.
keyid: string Key ID.
life: string Lifetime of a key.
auth_agekeys Parameters related to key lifetime.
time: string Time period from when the system starts until the current time.
trusted keynum: string Number of trusted keys.
expired keynum: string Number of expired keys.
Authentication keyID: string Authentication key ID.
Table 3 describes output fields and messages for the debugging ntp-service event command.
Table 96 Output from the debugging ntp-service event command
Field
Description
NTP: control event NTP control event.
event: string Event code.
eventnum: string Number of events.
peer: string IP address of the peer.
Table 4 describes output fields and messages for the debugging ntp-service filter command.
Table 97 Output from the debugging ntp-service filter command
Field
Description
NTP: adj freq Adjustment frequency.
last clockoffset: string Last clock offset.
last drift_comp: string Last frequency.
new clockOffset: string New clock offset.
134