HP Comware 5 Debug Manual Vol 3

Field
Description
new drift_comp: string New frequency.
Table 5 describes output fields and messages for the debugging ntp-service packet command.
Table 98 Output from the debugging ntp-service packet command
Field
Description
NTP: titleAndTip control packet from
sourceIPAddress to DestIPAddress
• titleAndTip—Title and prompt information.
• sourceIPAddress—Source IP address of the packet.
• DestIPAddress—Destination IP address of the packet.
version: string Version number in the control packet.
r: string Response bit in the control packet.
e: string Error bit in the control packet.
m: string More bit in the control packet.
o: string Operation code in the control packet.
sequence: string Sequence number in the control packet.
status: string Status words in the control packet.
associationID: string Association ID in the control packet.
data: string Data information in the control packet.
authenticator: string Authenticator information in the control packet.
packet to string Destination IP address of the packet.
leap: string Leap indicator in a packet.
version: string Version number in a packet.
mode: string Working mode in a packet.
vrfindex: string Index of the VPN that received or sent a packet.
stratum: string Stratum information in a packet.
poll: string Poll interval information in a packet.
precision: string Precision information in a packet.
rdel: string Root delay information in a packet.
rdsp: string Root dispersion information in a packet.
refid: string
ID of the reference clock.
If the reference clock is a local clock, the contents of this field vary
by the stratum of the local clock. If the stratum is 1, this field
displays LOCL. If the stratum is another value, this field displays
the IP address of the local clock.
If the reference clock is the clock of another device in the network,
this field displays the IP address of this device.
reftime: string Reference timestamp.
orgtime: string Originate timestamp.
rectime: string Receive timestamp.
135