HP Comware 5 Debug Manual Vol 3

Field
Description
xmttime: string Transmit timestamp.
inptime: string Timestamp for processing a packet.
packet from SourceIPAddress to
DestIPAddress on InterfaceName
• SourceIPAddress—Source IP address.
• DestIPAddress—Destination IP address.
• InterfaceName—Name of the interface receiving the packet.
Table 6 describes output fields and messages for the debugging ntp-service parameter command.
Table 99 Output from the debugging ntp-service parameter command
Field
Description
NTP: popcorn spike: string Offset jitter.
NTP: discard: string
The sample is discarded if the lifetime of the new sample is
lower than or equal to the selected sample. This field displays
the lifetime of the new sample.
clock_filter(PeerAddr, SampleOffset,
SampleDelay, SampleDisp)
IP address, sample offset, sample delay, and sample
dispersion of the peer in clock-filter.
offset: string Offset of the peer.
delay: string Delay of the peer.
dispersion: string Dispersion of the peer.
std: string Jitter of the peer.
Table 7 describes output fields and messages for the debugging ntp-service refclock command.
Table 100 Output from the debugging ntp-service refclock command
Field
Description
Report Event: Reference clock event.
Clock: string IP address of the reference clock.
Event: string Description of the clock event.
Code: string Event code of the clock.
RefClock Transmit: At CurrentTime IPAddr
The reference clock sent analog information:
• CurrentTime—Current system time.
• IPAddr—IP address of the reference clock.
RefClock Sample: Sample of the reference clock.
sampleNum: string Number of samples.
offset: string Offset.
disp: string Dispersion.
std: string Jitter.
RefClock Receive: At CurrentTime IPAddr
The reference clock receive analog information:
• CurrentTime—Current system time.
• IPAddr—IP address of the reference clock.
136