HP Comware 5 Debug Manual Vol 3

OSPF debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ospf event
Use debugging ospf event to enable OSPF event debugging.
Use undo debugging ospf event to disable OSPF event debugging.
Syntax
debugging ospf [ process-id ] event [ bfd | error | graceful-restart | interface | neighbor ]
undo debugging ospf [ process-id ] event [ bfd | error | graceful-restart | interface | neighbor ]
Default
OSPF event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID, in the range of 1 to 65535.
bfd: Specifies OSPF BFD event debugging.
error: Specifies OSPF error event debugging.
graceful-restart: Specifies OSPF graceful restart (GR) event debugging.
interface: Specifies interface event debugging.
neighbor: Specifies OSPF neighbor event debugging.
Usage guidelines
If no process ID is specified, the event debugging information of all the OSPF processes will be
displayed.
Table 1 describes output fields and messages for the debugging ospf event bfd command.
Table 103 Output from the debugging ospf event bfd command
Field
Description
OSPF process-id:OSPF received packet having
conflicted Router ID :rt-id
OSPF received a packet with a conflicting Router ID.
rt-id indicates the router ID of the neighbor.
140