HP Comware 5 Debug Manual Vol 3
•
On Router A, OSPF process 1 is created and area 0 is created in OSPF process 1. Ethernet 1/0 is
enabled with OSPF and is configured to belong to area 0.
•
On Router B, OSPF process 1 is created. Ethernet 1/0 is enabled with OSPF and is configured to
belong to area 0.
<RouterA> debugging ospf event neighbor
<RouterA>
OSPF 1: Nbr 150.1.1.2 Rcv KillNbr State Full -> Down.
OSPF 1: Nbr 150.1.1.2 Rcv HelloReceived State Down -> Init.
OSPF 1: Nbr 150.1.1.2 Rcv 2WayReceived State Init -> 2Way.
OSPF 1: Nbr 150.1.1.2 Rcv AdjOk? State 2Way -> ExStart.
OSPF 1: Nbr 150.1.1.2 Rcv NegotiationDone State ExStart -> Exchange.
OSPF 1: Nbr 150.1.1.2 Rcv ExchangeDone State Exchange -> Loading.
OSPF 1: Nbr 150.1.1.2 Rcv LoadingDone State Loading -> Full.
// OSPF process 1 established an adjacency relationship with n e i g h b o r 15 0 .1.1. 2
# Enable OSPF GR event debugging on Router A. The output in this example was created when the
following conditions exist:
•
Ethernet 1/0 (150.1.1.1/24) on Router A is connected to Ethernet 1/0 (150.1.1.2/24) on Router B
over a broadcast network.
•
On Router A:
OSPF process 1 is created and area 0 is created in OSPF process 1.
Ethernet 1/0 is enabled with OSPF and is configured to belong to area 0.
OSPF process 1 is enabled with OSPF local link signaling, OSPF out-of-band synchronization,
and OSPF GR.
•
On Router B:
OSPF process 1 is created.
Ethernet 1/0 is enabled with OSPF and is configured to belong to area 0.
OSPF process 1 is enabled with OSPF local link signaling and OSPF out-of-band
synchronization.
When you restart GR in OSPF process 1, output similar to the following example is generated:
<RouterA>reset ospf 1 process graceful-restart
%Dec 12 09:36:12:500 2006 RouterA RM/3/RMLOG:OSPF-NBRCHANGE: Process 1, Neighbour
150.1.1.2(Ethernet1/0) from Full to Down
OSPF 1: Intf 150.1.1.1 Rcv InterfaceDown State BackupDR -> Down.
OSPF 1 nonstandard GR Started for OSPF Router
// The device started OSPF GR.
OSPF 1 notify RM that OSPF process will enter GR.
OSPF 1 created GR wait timer, timeout interval is 40(s).
OSPF 1 created GR Interval timer,timeout interval is 120(s).
OSPF 1: Intf 150.1.1.1 Rcv InterfaceUp State Down -> Waiting.
OSPF 1: Intf 150.1.1.1 Rcv BackupSeen State Waiting -> BackupDR.
OSPF 1 created OOB Progress timer for neighbor 150.1.1.2.
OSPF 1 restarted OOB Progress timer for neighbor 150.1.1.2.
OSPF 1 restarted OOB Progress timer for neighbor 150.1.1.2.
%Dec 12 09:36:12:566 2006 RouterA RM/3/RMLOG:OSPF-NBRCHANGE: Process 1, Neighbour
150.1.1.2(Ethernet1/0) from Loading to Full
142