HP Comware 5 Debug Manual Vol 3
Field
Description
OSPF HSB Bkp: Instance ID: instance-id Process ID:
process-id Area ID: area-id
OSPF backed up the OSPF process area data
under the specified instance.
• instance-id—OSPF instance ID.
• process-id—OSPF process ID.
• area-id—Area ID.
OSPF HSB Res: Instance ID: instance-id Process ID:
process-id
OSPF restored the OSPF process data under the
specified instance.
• instance-id—OSPF instance ID.
• process-id—OSPF process ID.
OSPF HSB Res: Instance ID: instance-id Process ID:
process-id Area ID: area-id
OSPF restored the OSPF process area data under
the specified instance.
• instance-id—OSPF instance ID.
• process-id—OSPF process ID.
• area-id—Area ID.
Examples
# Enable hot-standby debugging for OSPF process 1. The output in this example was created when the
following conditions exist:
•
Router A is a dual-master device and its master board boots first.
•
On Router A, OSPF process 1 is created, and area 0 and area 1 are configured under OSPF
process 1.
•
Area 0 is configured to contain network 10.10.10.10/32. OSPF is enabled on Loopback 0
(10.10.10.10/32.
•
Ar e a 1 i s c o n f i g u r e d t o c o n t a i n n e t w o r k 11.11.11.11 / 3 2 . OSPF is enabled on Loopback 1
(11.11.11.11 / 3 2 ) .
When you insert the standby board, output similar to the following example is generated:
<RouterA> debugging ospf 1 hot-standby
%Apr 26 10:45:44:348 2007 RouterA HA/4/LOG: Batch backup started
OSPF 1 Back-up process data Start.
*Apr 26 10:45:44:363 2007 RouterA RM/6/RMDEBUG:
OSPF HSB Bkp: Instance ID: 0 Process ID: 1
OSPF 1 Back-up process data End.
// OSPF started and then ended backing up OSPF process 1 data.
OSPF 1 Back-up Area data Start.
*Apr 26 10:45:44:379 2007 RouterA RM/6/RMDEBUG:
OSPF HSB Bkp: Instance ID: 0 Process ID: 1 Area ID: 0.0.0.0
OSPF 1 Back-up Area data End.
// OSPF started and then ended backing up data for area 0 of OSPF process 1.
OSPF 1 Back-up Area data Start.
*Apr 26 10:45:44:394 2007 RouterA RM/6/RMDEBUG:
OSPF HSB Bkp: Instance ID: 0 Process ID: 1 Area ID: 0.0.0.1
OSPF 1 Back-up Area data End.
// OSPF started and then ended backing up data backup for area 1 of OSPF process 1.
*Apr 26 10:45:44:394 2007 RouterA RM/6/RMDEBUG:
144