HP Comware 5 Debug Manual Vol 3

OSPF HSB Bkp: Process ID: 1 Area ID: 0.0.0.1 IpAdderss :11.11.11.11 Physical
Index:4 Logical Index:0.0.0.0
// OSPF backed up the data on Loopback 1 in area 1 of process 1.
*Apr 26 10:45:44:428 2007 RouterA RM/6/RMDEBUG:
OSPF HSB Bkp: Process ID: 1 Area ID: 0.0.0.0 IpAdderss :10.10.10.10 Physical
Index:3 Logical Index:0.0.0.0
// OSPF backed up the data on Loopback 0 in area 0 of process 1.
%Apr 26 10:45:55:483 2007 RouterA HA/4/LOG: Batch backup finished
// Batch backup finished.
debugging ospf lsa
Use debugging ospf lsa to enable OSPF LSA debugging.
Use undo debugging ospf lsa to disable OSPF LSA debugging.
Syntax
debugging ospf [ process-id ] lsa [ generate | install ]
undo debugging ospf [ process-id ] lsa [ generate | install ]
Default
OSPF LSA debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
generate: Specifies LSA generation debugging.
install: Specifies debugging for the installation of LSAs into the LSDB.
Usage guidelines
If no process ID is specified, the LSA debugging information of all the OSPF processes will be displayed.
Table 4 describes output fields and messages for the debugging ospf lsa command.
Table 106 Output from the debugging ospf lsa command
Field
Description
OSPF process-id OSPF process ID.
op-type LSA at x ms
Operation on LSAs:
• Generate—Generating LSAS
• Install—Installing LSAs.
145