Manualshelf

HP Comware 5 Debug Manual Vol 3

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
151152153154155156157158159160
*Dec 12 11:07:33:610 2006 RouterA RM/6/RMDEBUG:LSA Age: 0 Options: ExRouting:ON.
*Dec 12 11:07:33:610 2006 RouterA RM/6/RMDEBUG:Length: 36 Seq# 8000002c CheckSum: 3185.
*Dec 12 11:07:33:610 2006 RouterA RM/6/RMDEBUG:Capabilities: VBit:0 EBit: 0 BBit: 0 NtBit:
0 Link# 1.
*Dec 12 11:07:33:610 2006 RouterA RM/6/RMDEBUG:LinkID: 150.1.1.0 LinkData: 255.255.255.0
LinkType: 3.
*Dec 12 11:07:33:610 2006 RouterA RM/6/RMDEBUG:TOS# 0 Metric 10.
// The device generated router LSAs.
%Dec 12 11:07:33:708 2006 RouterA RM/3/RMLOG:OSPF-NBRCHANGE: Process 1, Neighbour
150.1.1.2(Ethernet1/0) from Loading to Full
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:OSPF 1: Generate LSA at 6357625 ms:
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:LSAType: 1.
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:LinkStateId: 1.1.1.1.
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:Advertising Rtr: 1.1.1.1.
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:LSA Age: 0 Options: ExRouting:ON.
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:Length: 36 Seq# 8000002d CheckSum: 44595.
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:Capabilities: VBit:0 EBit: 0 BBit: 0 NtBit:
0 Link# 1.
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:LinkID: 150.1.1.2 LinkData: 150.1.1.1
LinkType: 2.
*Dec 12 11:07:38:630 2006 RouterA RM/6/RMDEBUG:TOS# 0 Metric 10.
// The device generated router LSAs after the neighbor entered the FULL state.
debugging ospf mpls-te
Use debugging ospf mpls-te to enable debugging for OSPF MPLS traffic engineering.
Use undo debugging ospf mpls-te to disable debugging for OSPF MPLS traffic engineering.
Syntax
debugging ospf [ process-id ] mpls-te
undo debugging ospf [ process-id ] mpls-te
Default
Debugging for OSPF MPLS traffic engineering is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID, in the range of 1 to 65535.
Usage guidelines
If no process ID is specified, the MPLS traffic engineering debugging information of all the OSPF
processes will be displayed.
149