HP Comware 5 Debug Manual Vol 3

Area ID : 0.0.0.0
Attached Rtr Count : 2
MPLS DR Router ID : 2.2.2.2
DR Intf Addr : 150.1.1.2
*Dec 20 15:01:37:130 2006 RouterA RM/6/RMDEBUG:OSPF TE
ReceiveOpqLsa: Processed Success
*Dec 20 15:01:40:194 2006 RouterA RM/6/RMDEBUG:OSPF TE
Received Network LSA by OSPF TE
Process ID : 1
Area ID : 0.0.0.0
Link Id : 3.1.1.2
Attached Rtr Count : 2
Advtg Router ID : 3.3.3.3
*Dec 20 15:01:50:194 2006 RouterA RM/6/RMDEBUG:OSPF TE
Received Network LSA by OSPF TE
Process ID : 1
Area ID : 0.0.0.0
Link Id : 3.1.1.2
Attached Rtr Count : 2
Advtg Router ID : 3.3.3.3
*Dec 20 15:01:52:194 2006 RouterA RM/6/RMDEBUG:OSPF TE
Received Network LSA by OSPF TE
Process ID : 1
Area ID : 0.0.0.0
debugging ospf non-stop-routing
Use debugging ospf non-stop-routing to enable OSPF NSR debugging.
Use undo debugging ospf non-stop-routing to disable OSPF NSR debugging.
Syntax
debugging ospf non-stop-routing
undo debugging ospf non-stop-routing
Default
OSPF NSR debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 5 describes output fields and messages for the debugging ospf non-stop-routing command.
152