HP Comware 5 Debug Manual Vol 3

a. Field
b. Description
c.
Succeeded in processing IPC message: X
d.
MINM succeeded in
processing IPC
messages X. X
indicates the IPC
message type:
• 0—Invalid operation type.
• 1—Adding VSI.
• 2—Deleting VSI.
• 3—Configuring B-VLAN.
• 4—Adding B-VLAN to the driver.
• 5—Deleting B-VLAN to the driver.
• 6—Deleting uplink port to the driver.
• 7—Adding uplink port to the driver.
• 8—Deleting uplink port.
• 9—Deleting an uplink port by the port
number.
• 10—Adding uplink port.
• 11 —Enabling re-encapsulation.
• 12—Disabling re-encapsulation.
• 13—Adding B-MAC.
• 14—Modifying B-MAC.
• 15—Deleting all B-MACs.
• 16—Deleting B-MACs of the specified
VSI.
• 17—Deleting B-MACs of the specified VSI
and link ID.
• 18—Deleting B-MACs of the specified
VLAN.
• 19—Deleting B-MACs of the specified
port.
• 20—Deleting B-MACs of the specified
VLAN and port.
• 21—Deleting B-MAC by MAC.
• 22—Aging B-MACs of the specified VSI.
• 23—Aging B-MACs of the specified link
ID.
• 24—Debugging.
• 25—Setting board boot.
• 26—Setting state for all boards.
• 27—Setting state for the VSI.
• 28—Processing B-MAC information
according to the B-MAC state.
• 29—Displaying data.
• 30—Configuring VSI when a board was
plugged.
• 31—Configuring uplink port when a
board was plugged.
9