HP Comware 5 Debug Manual Vol 3

Field
Description
op-type vertex:Rtr-Lsa link-id, Cost to root cost, Nh
next-hop
Operation on the current candidate node (router
node).
• op-type—Type of operation to perform on the
candidate node. It can be Add, Update, Remove,
or Get.
• link-id—Link ID of the router LSA.
• cost—Cost to the root node.
• next-hop—Next hop.
op-type vertex:Net-Lsa link-id net-mask, Cost to root
cost, Nh next-hop
Operation on the current candidate node (network
node).
• op-type—Type of operation to perform on the
candidate node. It can be Add, Update, Remove,
or Get.
• link-id—Link ID of the router LSA.
• net-mask—Network mask in the network LSA.
• cost—Cost to the root node.
• next-hop—Next hop.
Can't find old route There is no such route in the routing table.
op-type path-type route dest-ip net-mask, nh next-hop,
cost cost
Operation on the routing table entry.
• op-type—Type of operation to perform on the
candidate node. It can be Add, Update, Remove,
or Get.
• path-type—Route type. It can be unrecognized,
intra-area, transit, stub, inter-area, ase, type1, or
type2.
• dest-ip—Destination IP address.
• next-hop—Next hop.
• cost—Path cost.
Find old route for net- addr /mask-len *route-type
route,nh next-hop,cost cost
The corresponding original route is found.
• net-addr—Network address.
• mask-len—Length of IP address mask.
• route-type—Route type. It can be transit or stub.
• next-hop—Next hop.
• cost—Route cost.
op-type rotue-type route, cost cost, nh next-hop
Operation on the router route.
• op-type—Operation type. It can be Old, Add, or
Update.
• route-type—Route type. It can be ABR, ASBR,
ABR/ASBR, or Rtr.
• cost—Path cost.
• next-hop—Next hop.
Stub Route: DEST: dest-addr MASK: mask-len, cost:
cost
Stub route information:
• dest-addr—Destination network address.
• mask-len—Network mask length.
• cost—Route cost.
164