HP Comware 5 Debug Manual Vol 3

Field
Description
net-rotue-type route, dest-id /mask-len, nh
next-hop,bnh backup-next-hop ,attr-list
In FRR auto-mode, the result of calculating the backup
next hop for intra-area routes of the network type is
listed.
• net-route-type—Network type, which can be
Transit or Stub.
• dest-id—Destination IP address.
• mask-len—Mask length.
• next-hop—Next hop address.
• backup-next-hop—Backup next hop address.
• attr-list—List to which the route belongs. The value
can be link (link protection), node (node
protection), or primary (primary next hop).
ISPF-VERT: Drop for Add into Candidate List Fail
Node dropped due to failure in adding into the
candidate list.
ISPF-VERT: Drop for TE link in nomal calc Node dropped due to full computation for a TE link.
ISPF-VERT: Drop for TENT: nbr node not found Node dropped due to neighbor node not found.
ISPF-NODE: Type: Type_id, Adv:Adv_id, Ls ID:Ls_ID SPF node type, advertising router, and LS ID.
ISPF-NODE: Process CandList Node Process candidate SPF node.
ISPF-NODE: Calc the child node Compute the child SPF node.
ISPF-VERT: action vertex:Rtr-node node_id, Cost to
root cost, Nexthop Count:count, Nh nexthop
Current router LSA node being processed.
• action—Add, update, remove, or get.
• node_id—Node ID.
• cost—Node cost.
• count—Number of next hops.
• nexthop—Next hop address.
ISPF-VERT: action vertex:Net-node node_id/mask,
Cost to root cost, Nexthop Count count, Nh nexthop
Current network LSA node being processed.
• action—Add, update, remove, or get.
• node_id/mask—Node ID/mask.
• cost—Node cost.
• count—Number of next hops.
• nexthop—Next hop address.
Table 9 describes output fields and messages for the debugging ospf spf ase command.
Table 111 Output from the debugging ospf spf ase command
Field
Description
OSPF process-id OSPF process ID.
Total route number less then maximum, the spf will be
rescheduled
Some routes were deleted to reduce the total route
number to be below the upper limit. SPF is now
rescheduled.
Process (Ase) ASE SPF calculation started.
Start (Incr ASE) Incremental ASE calculation started.
167