HP Comware 5 Debug Manual Vol 3

OSPF 1 ASE net route,100.1.5.0/24,nh 150.1.1.2
OSPF 1 ASE net route,100.1.5.0/24,Inherit backup nexthop
OSPF 1 ASE net route,100.1.5.0/24,nh 150.1.1.2,bnh 0.0.0.0
OSPF 1 ASE net route,100.1.6.0/24,nh 150.1.1.2
OSPF 1 ASE net route,100.1.6.0/24,Inherit backup nexthop
OSPF 1 ASE net route,100.1.6.0/24,nh 150.1.1.2,bnh 0.0.0.0
OSPF 1 ASE net route,100.1.7.0/24,nh 150.1.1.2
OSPF 1 ASE net route,100.1.7.0/24,Inherit backup nexthop
OSPF 1 ASE net route,100.1.7.0/24,nh 150.1.1.2,bnh 0.0.0.0
OSPF 1 ASE net route,100.1.8.0/24,nh 150.1.1.2
OSPF 1 ASE net route,100.1.8.0/24,Inherit backup nexthop
OSPF 1 ASE net route,100.1.8.0/24,nh 150.1.1.2,bnh 0.0.0.0
// OSPF performed ASE route backup next hop calculation.
debugging ospf timer
Use debugging ospf timer to enable OSPF timer debugging.
Use undo debugging ospf timer to disable OSPF timer debugging.
Syntax
debugging ospf [ process-id ] timer [ lsa-generate | spf ]
undo debugging ospf [ process-id ] timer [ lsa-generate | spf ]
Default
OSPF timer debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
lsa-generate: Specifies LSA generation timer debugging.
spf: Specifies SPF calculation timer debugging.
Usage guidelines
If no process ID is specified, the timer debugging information of all the OSPF processes will be displayed.
Examples
# Enable OSPF timer debugging on Router A. The output in this example was created when the following
conditions exist:
•
Ethernet 1/0 (150.1.1.1/24) on Router A is connected to Ethernet 1/0 (150.1.1.2/24) on Router B
over a broadcast network.
•
On Router A, OSPF process 1 is created and area 0 is created in OSPF process 1. Ethernet 1/0 is
enabled with OSPF and is configured to belong to area 0.
•
On Router B, OSPF process 1 is created. Ethernet 1/0 is enabled with OSPF and is configured to
belong to area 0.
176