HP Comware 5 Debug Manual Vol 3

OSPFv3 debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ospfv3 event
Use debugging ospfv3 event to enable OSPFv3 event debugging, such as ABR, ASBR, or virtual link
event debugging.
Use undo debugging ospfv3 event to disable OSPFv3 event debugging.
Syntax
debugging ospfv3 event { abr | all | bfd | asbr | vlink }
undo debugging ospfv3 event { abr | all | asbr | bfd | vlink }
Default
OSPFv3 event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
abr: Specifies ABR event debugging.
all: Specifies all event debugging.
asbr: Specifies ASBR event debugging.
bfd: Specifies BFD event debugging.
vlink: Specifies virtual link event debugging.
Usage guidelines
Table 1 describes output fields and messages for the debugging ospfv3 event abr command.
Table 112 Output from the debugging ospfv3 event abr command
Field
Description
OSPFv3 ROUTER[number] OSPFv3 process number.
Change status to string
Router status change.
string indicates router status type. It can be ABR or
non-ABR.
Donot creat default LSA for no FULL neighbors
No default Type-3 LSA is generated because there is
no FULL neighbor in the backbone area.
Table 2 describes output fields and messages for the debugging ospfv3 event bfd command.
178