HP Comware 5 Debug Manual Vol 3

Views
User view
Default command level
1: Monitor level
Parameters
event: Specifies event debugging for the interface state machine.
status: Specifies status debugging for the interface state machine.
timer: Specifies timer debugging for the interface state machine.
Usage guidelines
Table 4 describes output fields and messages for the debugging ospfv3 ifsm command.
Table 115 Output from the debugging ospfv3 ifsm command
Field
Description
OSPFv3
IFSM[interfacename]
OSPFv3 interface state machine debugging.
state (interface-event)
Current interface state state and interface event interface-event.
Current interface state:
Down—The interface is down.
Loopback—The interface is a loopback interface.
Waiting—The interface is in the waiting state.
P-To-P —The interface is connected to a P2P network or configured as one end
of a virtual link.
BackupThe interface is the backup designated router.
DRThe interface is the designated router.
Event that triggers an interface state change:
InterfaceUp—The interface state is changed from Down to UP.
WaitTimer—The wait timer expires.
BackupSeen—Indicates whether the interface detects a BDR on the network.
The interface receives from a neighbor a hello packet declaring the neighbor is
a BDR, or declaring the neighbor is a DR.
NeighborChange—A neighbor becomes a DR or BDR, or it is no longer a DR
or BDR. A DR/BDR re-election is required.
LoopInd—The interface is a loopback interface.
UnLoopInd—The interface is no longer a loopback interface.
InterfaceDown—The interface state changes from UP to Down.
DR-Election[string]: DR
ROUTER-ID
Current DR. The string argument can take one of the following values:
1st—The first DR election is performed.
2nd—An interface state change occurs and a DR re-election is performed.
DR-Election[string]: BDR
ROUTER-ID Backup
RouterID
Current BDR. The string argument can take one of the following values:
1st—The first DR election is performed.
2nd—An interface state change occurs and a DR re-election is performed.
183