HP Comware 5 Debug Manual Vol 3

Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all LSA debugging.
flooding: Specifies LSA flooding debugging.
generate: Specifies LSA generation debugging.
install: Specifies debugging of LSAs installation into the LSDB.
maxage: Specifies LSA maxage debugging.
refresh: Specifies LSA refresh debugging.
verbose: Specifies LSA detailed debugging information.
Usage guidelines
Table 5 describes output fields and messages for the debugging ospfv3 lsa flooding command.
Table 116 Output from the debugging ospfv3 lsa flooding command
Field
Description
LSA[string:Type(number) :LSID:adv_ro
uter *]
string indicates the LSDB containing the LSA. It can be:
• Link—Identified by interface type and interface number.
• Area ID.
• AS—The flooding range is the entire AS.
number indicates the LSA type. It can be:
• 0x2001—Router-LSAs.
• 0x2002—Network-LSAs.
• 0x2003—Inter-Area-Prefix-LSAs.
• 0x2004—Inter-Area-Router-LSAs.
• 0x2005—AS-external-LSAs.
• 0x0008—Link-LSAs.
• 0x2009—Intra-Area-Prefix-LSAs.
• 0x000b—Grace-LSA.
LSID indicates the Link-state ID of the LSA.
adv_router indicates the ID of the advertising router.
* indicates that the LSA is self-originated.
Table 6 describes output fields and messages for the debugging ospfv3 lsa maxage command.
185