HP Comware 5 Debug Manual Vol 3

Syntax
debugging ospfv3 route [ ase | ia | install | spf ]
undo debugging ospfv3 route [ ase | ia | install | spf ]
Default
OSPFv3 route debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
ase: Specifies OSPFv3 ASE route debugging.
ia: Specifies OSPFv3 inter-area route debugging.
install: Specifies debugging of OSPFv3 routes installation into the routing table.
spf: Specifies OSPFv3 SPF route calculation debugging.
Usage guidelines
Table 9 describes output fields and messages for the debugging ospfv3 route command.
Table 120 Output from the debugging ospfv3 route command
Field
Description
SPF[AreaID] SPF calculation.
LSA[string:Type(number) :LSID:adv_router *]
string indicates the LSDB containing the LSA. It can be:
• Link, identified by interface type and interface number.
• Area ID.
• AS, indicating the flooding range is the entire AS.
number indicates LSA number. It can be:
• 0x2001—Router-LSAs.
• 0x2002—Network-LSAs.
• 0x2003—Inter-Area-Prefix-LSAs.
• 0x2004—Inter-Area-Router-LSAs.
• 0x2005—AS-external-LSAs.
• 0x0008—Link-LSAs.
• 0x2009—Intra-Area-Prefix-LSAs.
• 0x000b—Grace-LSA.
LSID indicates link-state ID of the LSA.
adv_router indicates ID of the advertising router.
* indicates that the LSA is self-originated.
193