HP Comware 5 Debug Manual Vol 3

PIM debugging commands
Support for VPN instances depends on your device model.
The output description tables in this document only contain fields and messages that require an
explanation.
debugging pim
Use debugging pim to enable PIM debugging.
Use undo debugging pim to disable PIM debugging.
Syntax
debugging pim [ all-instance | vpn-instance vpn-instance-name ] { all | assert [ advanced-acl-number ]
[ receive | send ] | df | event [ advanced-acl-number ] | join-prune [ advanced-acl-number ] [ receive
| send ] | msdp [ advanced-acl-number ] | neighbor [ basic-acl-number ] [ receive | send ] | register
[ advanced-acl-number ] | routing-table [ advanced-acl-number ] | rp [ receive | send ] | state-refresh
[ advanced-acl-number ] [ receive | send ] }
undo debugging pim [ all-instance | vpn-instance vpn-instance-name ] { all | assert [ receive | send ] |
df | event | join-prune [ receive | send ] | msdp | neighbor [ receive | send ] | register | routing-table
| rp [ receive | send ] | state-refresh [ receive | send ] }
Default
PIM debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance. The VPN instance name must be a
case-sensitive string of 1 to 31 characters and must not contain any spaces.
all: Specifies all types of PIM debugging.
assert: Specifies PIM assert message debugging.
advanced-acl-number: Specifies an advanced ACL number in the range of 3000 to 3999. An advanced
ACL defines the range of multicast groups to which the advertised RP is designated.
receive: Specifies inbound PIM packet debugging.
send: Specifies outbound PIM packet debugging.
df: Specifies DF information debugging.
event: Specifies PIM event debugging.
join-prune: Specifies PIM join/prune message debugging.
196