HP Comware 5 Debug Manual Vol 3

msdp: Specifies debugging for packets exchanged between PIM and MSDP.
neighbor: Specifies PIM neighbor debugging.
basic-acl-number: Specifies a basic ACL number in the range of 2000 to 2999.
register: Specifies PIM register message debugging.
routing-table: Specifies debugging for state change of the PIM multicast routing table.
rp: Specifies debugging for PIM packets related to the BSR and the RP.
state-refresh: Specifies PIM state refresh message debugging.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command enables PIM debugging for the public
network.
Table 1 describes output fields and messages for the debugging pim assert command.
Table 121 Output from the debugging pim assert command
Field
Description
pref Preference value.
metric Metric value.
rpt set/unset The RPT bit is 1/0.
reserved field non-zero The reserved field is non-zero.
unknown neighbor The neighbor is unknown.
truncated assert packet The packet length is invalid.
bad group address/mask The group address or the address mask is incorrect.
unknown group family The group family is incorrect.
bad source address The source address is incorrect.
locally scoped Node-local or link-local scope.
Fsm:assert Assert state machine.
current state Current state of the assert state machine.
received event Type of the event received by the assert state machine.
loser/Winner/noinfo
The assert state machine was in
loser/winner/no-information state.
state1->state2
The assert state machine was transferred from state1
to state2.
Table 2 describes output fields and messages for the debugging pim df command.
Table 122 Output from the debugging pim df command
Field
Description
DF election DF election started.
DFT DF election timer.
DFT expire time Expiration time of DF election timer.
197