HP Comware 5 Debug Manual Vol 3

Field
Description
MC Number of sent Offer or Winner packets.
Offer Initial state of DF election.
Lose DF election state: Lose.
Win DF election state: Win.
Backoff The winner DF received better Offer packets.
Table 3 describes output fields and messages for the debugging pim event command.
Table 123 Output from the debugging pim event command
Field
Description
unsupported pim version The PIM packet version is not supported.
PIM packet too short The PIM packet is too short.
checksum error The checksum of the packet is incorrect.
non-pim interface
A PIM message was received on a non-PIM-enabled
interface.
unsupported type The specified PIM packet type is not supported.
Socket set option error Socket option setting failed.
Packet send error A PIM message failed to be sent out.
Source address is one of the interfaces address The source address is the address of a local interface.
Source address address is invalid The source address address is invalid.
Invalid source mask The source address mask is invalid.
Active/Inactive event received A source-active/inactive event was received.
Clear event received A clear-entry event was received.
Wrong IIF Incorrect incoming interface.
NoInfo
The downstream state machine was in no-information
state.
PPending
The downstream state machine was in prune pending
state.
Pruned
The PIM-DM downstream state machine was in pruned
pending state.
Joined
The PIM-SM downstream state machine was in joined
state.
Forwarding
The PIM-DM upstream state machine was in
forwarded state.
Pruned
The PIM-DM upstream state machine was in pruned
state.
AckPending
The PIM-DM upstream state machine was in
ack-pending state.
Joined
The PIM-SM (S, G) or (*, G) upstream state machine
was in joined state.
198