HP Comware 5 Debug Manual Vol 3

Field
Description
NotJoined
The PIM-SM (S, G) or (*, G) upstream state machine
was in not-joined state.
PruneTmp
The PIM-SM (S, G, RPT) downstream state machine
was in temporary prune state.
PPendingTmp
The PIM-SM (S, G, RPT) downstream state machine
was in temporary prune pending state.
PPT Expired The prune pending timer timed out.
RPF_Interface changed The RPF interface changed.
Genid changed The neighbor generation ID changed.
PT Expired The prune timer timed out.
Failed to pass MSF Failed to pass multicast source filtering.
NotOriginator/Originator
The originator state machine was in
not-originator/originator state.
SAT Expired The source-alive timer timed out.
Join suppressed
The device received a join message to the upstream
neighbor on the incoming interface and suppressed its
own join message.
Override it
The device received a prune message to the upstream
neighbor on the incoming interface and sent a join
message.
ET Expired The PIM-SM downstream interface timer timed out.
register downstream Registering the outgoing interface.
Mcast-Boundary-Changed Multicast boundary change event.
flush timer
Timer used for periodically checking whether new RP
and DF information issued to the forwarding module
exist.
walk timer Timer used for periodically traversing RP table entries.
Table 4 describes output fields and messages for the debugging pim join-prune command.
Table 124 Output from the debugging pim join-prune command
Field
Description
JP
Join/prune message.
GFT
Graft message.
GAK
Graft-ack message.
bad group/source address, mask or family Incorrect group/source address, mask or family.
Upstream
Upstream neighbor information in the message.
Groups
Number of groups in the message.
Group: addr/mask --- m joins n prunes
Group information in the message, including group
address/mask length, m times of joins, and n times of
prunes.
199