HP Comware 5 Debug Manual Vol 3

Field
Description
PIM Neighbor address on interface interfacename
timed out
Neighbor address on interfacename timed out.
Failed to create PIM neighbor address, PIM Hello
denied by neighbor policy on interfacename
A PIM neighbor relationship failed to be established
because the source address in the hello message
failed to pass the configured hello message filtering.
Table 6 describes output fields and messages for the debugging pim register command.
Table 126 Output from the debugging pim register command
Field
Description
REG Register message.
RSP Register-stop message.
Register Stop Register stopped.
Border bit Boundary bit.
src Source address of the IP packet.
dst Destination address of the IP packet.
probe Probe message.
ignored A message was dropped.
Table 7 describes output fields and messages for the debugging pim routing-table command.
Table 127 Output from the debugging pim routing-table command
Field
Description
Creating/Deleting
PIM created or deleted entries.
mrt
Multicast routing table.
Add/Del oil PIM added or deleted outgoing interfaces.
Null iif
Null incoming interface.
Adding/Deleting iif PIM added or deleted incoming interfaces.
RP is not found
The RP was not found.
Table 8 describes output fields and messages for the debugging pim rp command.
Table 128 Output from the debugging pim rp command
Field
Description
auto-RP announce
Auto-RP announce message.
auto-RP discovery
Auto-RP discovery message.
C-RP/CRP Candidate RP.
BSR Bootstrap router.
prefix count
Prefix count field in the C-RP advertisement message.
priority
Priority field in the C-RP advertisement message.
201