HP Comware 5 Debug Manual Vol 3

MBGP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging bgp update ipv4 multicast
Use debugging bgp update ipv4 multicast to enable BGP update debugging for IPv4-MBGP address
family.
Use undo debugging bgp update ipv4 to disable BGP update debugging for IPv4-MBGP address family.
Syntax
debugging bgp update ipv4 multicast [ peer { ip-address | group-name } ] [ receive | send ] [ verbose ]
undo debugging bgp update ipv4 multicast [ peer { ip-address | group-name } ] [ receive | send ]
[ verbose ]
Default
BGP update debugging for IPv4-MBGP address family is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
ip-address: Specifies the IP address of the peer entity.
group-name: Specifies the peer group, which is a string of 1 to 47 characters.
receive: Specifies debugging for received BGP updates.
send: Specifies debugging for sent BGP updates.
verbose: Displays detailed debugging information.
Usage guidelines
IMPORTANT:
Enabling debugging might affect system performance.
Use this command only when necessary and
disable debugging when the debugging operation is complete.
Table 1 describes the output fields and messages for the debugging bgp update ipv4 multicast
command.
Table 6 Output from the debugging bgp update ipv4 multicast command
Field
Description
BGP.xxx Name of the current instance.
Recv UPDATE from x.x.x.x BGP received an update from BGP neighbor x.x.x.x.
13