HP Comware 5 Debug Manual Vol 3

*0.1526343 Sysname PIM/7/NBR:(public net): Option: 19, length: 4 (P011891)
*0.1526343 Sysname PIM/7/NBR:(public net): DR priority: 1 (P011916)
*0.1526343 Sysname PIM/7/NBR:(public net): Option: 20, length: 4 (P011891)
*0.1526343 Sysname PIM/7/NBR:(public net): Genid: 0X67DC7FAB (P011923)
// PIM sent a PIMv2 hello message from 10 .1.1.1 to 224.0.0.13 out of VLAN-interface 10.
# Enable debugging for inbound PIM register messages for the public network.
<Sysname> debugging pim register receive
*0.4825671 Sysname PIM/7/REG:(public net): PIM ver 2 RSP receiving 12.12.12.12 -> 100.1.1.1
on Vlan-interface20 (S01648)
*0.4825671 Sysname PIM/7/REG:(public net): Register Stop: (100.1.1.10, 229.0.0.1)
(S01650)
// PIM received a register-stop message from 12.12.12.12 to 10 0 .1.1.1 on VLAN-interface 20. In the
register-stop message, the group address is 229.0.0.1 and the multicast s o u r c e a d d r e s s i s 10 0 .1.1.10 .
# Enable debugging for outbound PIM register messages for the public network.
<Sysname> debugging pim register send
*0.5554875 Sysname PIM/7/REG:(public net): PIM ver 2 REG sending 100.1.1.1 -> 12.12.12.12
on Vlan-interface20 (S01729)
*0.5554875 Sysname PIM/7/REG:(public net): Border bit: false Null bit: true (S01737)
*0.5554875 Sysname PIM/7/REG:(public net): Encapsulated ip src: 100.1.1.11, dst:229.0.0.1,
len: 20 (S01744)
// PIM sent a PIMv2 register message from 10 0 .1.1.1 to 12.12.12.12 out of VLAN-interface 20. The border
bit is not set, but Null bit is set.
# Enable debugging for PIM multicast routing table state changes for the public network.
<Sysname> debugging pim routing-table
*0.4825125 Sysname PIM/7/ROUT:(public net): PIM-SM: Create (100.1.1.10, 229.0.0.1) entry
in mrt. (S018118)
*0.4825125 Sysname PIM/7/ROUT:(public net): PIM-SM: Adding iif 100.1.1.1 to (100.1.1.10,
229.0.0.1). (S012740)
*0.4825125 Sysname PIM/7/ROUT:(public net): PIM-SM: Add oif: register for (100.1.1.10,
229.0.0.1) (S017199)
// PIM created a PIM-SM state entry (100.1.1.10, 229.0.0.1), with the interface toward 10 0 .1.1.1 a s t h e
incoming interface and the registered virtual interface as the outgoing interface.
# Enable debugging for inbound PIM packets related to the BSR and the RP for the public network.
<Sysname> debugging pim rp receive
//*0.2776421 Sysname PIM/7/RP:(public net): PIM ver 2 CRP receiving 10.1.1.2 -> 19.1.1.1
on Vlan-interface10 (S01409)
*0.2776421 Sysname PIM/7/RP:(public net): C-RP 12.12.12.12, prefix count 1, priority: 0,
holdtime 150 (S01433)
*0.2776421 Sysname PIM/7/RP:(public net): 224.0.0.0/4 (S01454)
*0.2776421 Sysname PIM/7/RP:(public net): Admin Scope Zone: 0 (S01455)
// PIM received a PIMv2 C-RP advertisement message from 10 .1.1. 2 to 19.1.1.1 on VLAN-interface 10.
PIM ver 2 BSR receiving 10.1.1.1 -> 224.0.0.13 on Vlan-interface10 (S01500)
*0.3307890 Sysname PIM/7/RP:(public net): BSR 19.1.1.1, frag 0, pri 0, hash mask
len 30 (S01520)
*0.3307890 Sysname PIM/7/RP:(public net): Group 224.0.0.0/4: frags 1, C-RP's 1 (S01544)
*0.3307890 Sysname PIM/7/RP:(public net): 12.12.12.12 pri: 0, holdtime: 150 (S01568)
206