HP Comware 5 Debug Manual Vol 3

Policy-based routing debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ip policy-based-route
Use debugging ip policy-based-route to enable policy-based routing (PBR) debugging.
Use undo debugging ip policy-based-route to disable PBR debugging.
Syntax
debugging ip policy-based-route
undo debugging ip policy-based-route
Default
PBR debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 1 describes output fields and messages for the debugging ip policy-based-route command.
Table 134 Output from the debugging ip policy-based-route command
a. Field
b. Description
c.
DP
d.
Data plane.
e.
This field is only supported by
multi-core devices.
f.
IP policy based routing success
g.
PBR succeeded.
h.
IP policy based routing fail for
interface index [STRING] not
exist
i.
PBR failed because the interface
with index [STRING] does not
exist.
j.
Support for this output depends
on the device model.
k.
IP policy based routing fail for
next-hop [STRING] error
l.
PBR failed because the next hop
with index [STRING] does not
exist.
m.
No memory space while
[STRING]
n.
Memory allocation for [STRING]
failed due to insufficient memory
space.
o.
headlen
p.
Header length.
222