HP Comware 5 Debug Manual Vol 3

Default
Port security debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of port security debugging.
error: Specifies port security error debugging.
event: Specifies port security event debugging.
slot slot-number: Specifies a card by its slot number. (Distributed devices—In standalone mode.)
slot slot-number: Specifies the ID of an IRF member device. (Centralized IRF devices.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the member ID of the IRF member device. The slot-number argument represents the
slot number of the card. (Distributed devices—In IRF mode.)
Usage guidelines
Table 2 describes output fields and messages for the debugging port-security error command.
Table 136 Output from the debugging port-security error command
Field
Description
InvalidAuth Invalid user.
Failed to handle set operation of PortSec security MAC
table.
The port security module failed to configure secure
MAC entries.
Failed to set PortMode.
The port security module failed to set port security
mode.
Failed to get physical control of IfIndex.
The port security module failed to obtain the physical
layer control information of the specified interface.
Configure IntrusionAction when failed to get portCB.
The port security module set intrusion protection
action when it failed to obtain the port control block.
Error: Unable to delete any MACs at interface: IfIndex
.
Self slot is SlotNum.
The port security module failed to delete any MAC
address at interface IfIndex. The slot number is
SlotNum.
Failed to set PortCB by handle.
The device failed to configure the port data structure
on the port security control block.
Failed to delete security MAC from list.Self slot is
SlotID.
The port security module failed to delete secure MAC
entries from the table. The slot is SlotID.
There is no security MAC match the delete condition.
Self slot is SlotID.
No secure MAC entry matches the delete condition.
The slot is SlotID.
Port Security's state is disabled! Port security is not enabled.
225