HP Comware 5 Debug Manual Vol 3

Portal debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging portal
Use debugging portal to enable portal debugging.
Use undo debugging portal to disable portal debugging.
Syntax
debugging portal { { acl | all | connection | packet [ acl acl-number ] } interface interface-type
interface-number | error | tcp-cheat }
undo debugging portal { { acl | all | connection | packet } interface interface-type interface-number |
error | tcp-cheat }
Default
Debugging for portal is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
acl: Specifies portal ACL debugging.
all: Specifies all types of portal debugging.
connection: Specifies portal connection debugging.
packet: Specifies portal packet debugging.
acl acl-number: Specifies an ACL to filter portal packets. The value range for the acl-number argument is
2000 to 3999. If you specify ACLs multiple times, the most recently specified ACL applies. Only the
source IP address field in the specified ACL rules is used for packet filtering.
interface: Specifies debugging on an interface.
interface-type interface-number: Specifies an interface by its type and number.
error: Specifies portal error debugging.
tcp-cheat: Specifies portal TCP anti-spoofing debugging.
Usage guidelines
Table 1 describes output fields and messages for the debugging portal tcp-cheat command.
230