HP Comware 5 Debug Manual Vol 3

Field
Description
Processing message-name Processing the message named message-name.
1 user index IP ip-address User index is index, and IP address is ip-address.
recv message-name from ACM
Received a message named message-name from ACM
module.
recv message-name from DRV
Received a message named message-name from the
driver.
Table 4 describes output fields and messages for the debugging portal acl command.
Table 141 Output from the debugging portal acl command
Field
Description
Portal interface Name of the interface enabled with Portal.
Status
Portal running status. “Running” means the portal is
running normally.
Action
Action of the matching rule:
• permit.
• redirect.
• deny.
• NULL.
Match rule Matching rule.
Inbound interface Inbound interface.
Type Portal rule type: Static or Dynamic.
Source Source information of the matching rule.
IP Source IP address of the matching rule.
Mask Source mask of the matching rule.
Protocol Protocol number of the matching rule.
Mac Source MAC address of the matching rule.
Interface
Source port number of the matching rule. If Layer-2
interface is not bound, the value here is any for
portal-enabled interfaces.
Vlan
Source VLAN ID of the matching rule. For a
portal-enabled routing interface, the value here is 0.
Destination Destination information of the matching rule.
IP Destination IP address of the matching rule.
Mask Destination mask of the matching rule.
TCP Port Destination port number of the matching rule.
Context Context sent by the driver module.
RuleID Portal rule ID.
Sequence Rule sequence number.
Failed to send core-message! Failed to send inter-core messages.
232