HP Comware 5 Debug Manual Vol 3

undo debugging portal server
Default
Portal server debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 6 describes output fields and messages for the debugging portal server command.
Table 143 Output from the debugging portal server command
Field
Description
User user-ip is being
detected, index = index,
detection mode = mode.
Detecting user user-ip. index indicates the user index. mode indicates the
detection mode:
• 0: No detection.
• 1: Traffic detection.
• 2: ICMP packet detection.
Failed to write msg message
to portal message queue.
Failed to write the msg message to the portal message queue.
msg indicates the message type:
• Reqinfo: Request information.
• ReqAuth: Authentication request.
• ReqLogout: Logout request.
• AckNtfLogout; Force-logout request.
Received message from
portal, IP = ip-address, type
= type.
Received a message from the portal module.
ip-address indicates the user IP. type indicates the message type:
• REACH_USER_LIMIT: Number of users has reached the maximum.
• ACCT_SUCCESS: Accounting succeeded.
• ACCT_FAIL: Accounting failed.
• PT_NORMAL_ACK_INFO: Information request response message.
• PT_NORMAL_ACK_AUTH: Authentication response message.
• PT_NORMAL_NTF_LOGOUT: Force-logout message.
•
PT_NORMAL_ACK_LOGOUT: Logout response message.
Received message from
portal web server, IP =
ip-address, type = type.
Received a message from the portal Web server.
ip-address indicates the user IP. type indicates the message type:
• PT_NORMAL_REQ_INFO: Information request message.
• PT_NORMAL_REQ_AUTH: Authentication request message.
• PT_NORMAL_REQ_LOGOUT: Logout request message.
•
PT_NORMAL_ACK_NTF_LOGOUT: Force-logout response message.
Connection from WS is not
for local server.
The Socket connection request received on the Web service (WS) module is not
for the local server.
Failed to read data from
connection.
Failed to read data from the Socket connection.
240