HP Comware 5 Debug Manual Vol 3

debugging posa event
Use debugging posa event to enable POS access event debugging.
Use undo debugging posa event to disable POS access event debugging.
Syntax
debugging posa event [ terminal terminal-id | app app-id ]
undo debugging posa event [ terminal terminal-id | app app-id ]
Default
POS access event debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
terminal-id: Specifies a POS terminal by its ID in the range of 1 to 255.
app-id: Specifies a POS application by its ID in the range of 1 to 31.
Usage guidelines
Table 1 describes output fields and messages for the debugging posa event command.
Table 144 Output from the debugging posa event command

Field

Description

App n: Succeeded to
send connecting
request to server.

Application n successfully sent a
connecting request to the FEP.

Terminal n: Received
control message of
deleting terminal.

POS access received a control message
that terminal n is deleted.

App n: Received
control message of
disconnecting by app.

POS access received a control message
that all connections to application n are
terminated.

App n: Received
control message of
setting tcp keepalive
option.

POS access received a control message
that TCP keepalive parameters of
application n are modified.

App n: Received line
disable message.

POS access received a message that
application n is switched between
synchronous and asynchronous modes.
Examples
# Enable POS access event debugging. When TCP application 2 in temporary connection mode is
connected to asynchronous terminal 1, output similar to the following example is generated:
<Sysname> debugging posa event
*Jul 30 19:44:18:392 2008 posa POSA/7/EVENT:
245