HP Comware 5 Debug Manual Vol 3

App 2: Received control message of deleting app.
// POS access received a control message that application 2 is deleted.
*Jul 30 19:44:18:392 2008 posa POSA/7/EVENT:
App 2: Received control message of disconnecting by app.
// POS access received a control message that all connections to application 2 are terminated.
debugging posa error
Use debugging posa error to enable POS access error debugging.
Use undo debugging posa error to disable POS access error debugging.
Syntax
debugging posa error [ terminal terminal-id | app app-id ]
undo debugging posa error [ terminal terminal-id | app app-id ]
Default
POS access error debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
terminal-id: Specifies a POS terminal by its ID in the range of 1 to 255.
app-id: Specifies a POS application by its ID in the range of 1 to 31.
Usage guidelines
Table 2 describes output fields and messages for the debugging posa error command.
Table 145 Output from the debugging posa error command

Field

Description

Failed to create template
of teminal(n), because of
failing to malloc memory
for terminal template.

POS access failed to create terminal
template (n) because memory failed to
be allocated for the template.

Terminal n: Failed to
hung up fcm when
reiniting terminal
instance.

POS access failed to be hung up when
terminal n was reset.

Failed to get correct
terminal template by
terminal(n) when
creating listen socket.

POS access failed to obtain the
correct terminal template through
terminal (n) when it was creating the
listen socket.

Failed to get app
template by trans
appID(n) when resetting
terminal instance.

POS access failed to obtain the
application terminal according to the
transparent application ID (n) when it
was resetting the terminal instance.
246