HP Comware 5 Debug Manual Vol 3

Default command level
1. Monitor level
Parameters
all: All types of PPPoE client debugging.
data: Debugging for data information of the PPPoE client at the session stage.
error: Error debugging for the PPPoE client.
event: Event debugging for the PPPoE client.
packet: Debugging for data information of the PPPoE client at the discovery stage.
verbose: Detailed information debugging for the PPPoE client.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Table 3 describes the output fields and messages for the debugging pppoe-client command.
Table 148 Output from the debugging pppoe-client command
Field
Description
IN Incoming packets at the PPPoE session stage.
OUT Outgoing packets at the PPPoE session stage.
Session Number Session number.
Len Packet length.
Table 4 describes the output fields and messages for the debugging pppoe-client packet command.
Table 149 Output from the debugging pppoe-client packet command
Field
Description
IN Incoming packets at the PPPoE discovery stage.
OUT Outgoing packets at the PPPoE discovery stage.
PADI The PPPoE active discovery initiation (PADI) packet.
PADO The PPPoE active discovery offer (PADO) packet.
PADR The PPPoE active discovery request (PADR) packet.
PADS The PPPoE active discovery session-conformation (PADS) packet.
PADT The PPPoE active discovery terminate (PADT) packet.
Len Packet length.
Table 5 describes the output fields and messages for the debugging pppoe-client verbose command.
Table 150 Output from the debugging pppoe-client verbose command
Field
Description
IN Incoming packets at the PPPoE discovery stage.
OUT Outgoing packets at the PPPoE discovery stage.
254