HP Comware 5 Debug Manual Vol 3

UT, Len = 36
00 0f e2 29 ad f4 00 0f e2 00 00 03 88 64 11 00
00 01 00 10 c0 21 01 00 00 0e 01 04 05 d4 05 06
3c f3 37 79
>>
Dest MAC Addr: 000f.e229.adf4, Src MAC Addr: 000f.e200.0003
Session Stage, Ver=1, Type=1, Session ID=1
*Aug 21 11:05:26:550 2007 Sysname PPPOEC/7/debugging:Ethernet1/1: Dialer1:0 was
bound to Dialer1 for PPPoE Session
// Interface Ethernet 1/1 sent a session-stage packet.
debugging pppoe-server
Use debugging pppoe-server to enable PPPoE server debugging.
Use undo debugging pppoe-server to disable PPPoE server debugging.
Syntax
debugging pppoe-server { all | data | error | event | packet } [ interface interface-type
interface-number ]
undo debugging pppoe-server { all | data | error | event | packet } [ interface interface-type
interface-number ]
Default
All types of PPPoE server debugging is disabled.
Views
User view
Default command level
1. Monitor level
Parameters
all: All types of PPPoE server debugging.
data: Debugging for data information of the PPPoE server at the session stage.
error: Error debugging for the PPPoE server.
event: Event debugging for the PPPoE server.
packet: Debugging for data information of the PPPoE server at the discovery stage.
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Table 6 describes the output fields and messages for the debugging pppoe-server command.
Table 151 Output from the debugging pppoe-server command
Field
Description
IN Incoming packets at the PPPoE session stage.
OUT Outgoing packets at the PPPoE session stage.
257