HP Comware 5 Debug Manual Vol 3

PTP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ptp
Syntax
debugging ptp { all | error | event | frame [ receive | send ] [ verbose ] | fsm | timer }
undo debugging ptp { all | error | event | frame [ receive | send ] [ verbose ] | fsm | timer }
Default
PTP debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging for PTP.
error: PTP error debugging.
event: PTP event debugging.
frame: PTP message debugging.
receive: Debugging for received PTP messages.
send: Debugging for sent PTP messages.
verbose: Detailed PTP message debugging.
fsm: PTP state machine debugging.
timer: Debugging for PTP timers.
Usage guidelines
Use debugging ptp to enable PTP debugging. Use undo debugging ptp to disable PTP debugging.
Table 1 describes output fields and messages for the debugging ptp error command.
Table 154 Output from the debugging ptp error command
Field
Description
Failed to initialzie PTP task information error, and failed
to malloc memory.
Failed to initialize PTP task information and failed to
allocate memory.
Table 2 describes output fields and messages for the debugging ptp fsm command.
260