Manualshelf

HP Comware 5 Debug Manual Vol 3

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
21222324252627282930
*Apr 26 16:30:21:471 2000 Sysname MFF/7/Debug_MFF_Event:
MFF Event:
Notify MCM ACL rule:
Interface name: Ethernet1/3,
Option type: ADD, Return Value: 0
// After automatic mode MFF was enabled for VLAN 100, MFF notified MCM to apply an ACL to user
port Ethernet 1/3 to deliver ARP packets to the CPU. The apply operation was successful.
*Apr 26 16:30:21:582 2000 Sysname MFF/7/Debug_MFF_Event:
MFF Event:
Notify DHSP ACL rule:
Interface name: Ethernet1/2, Port type: NETWORK,
Option type: ADD, Return Value: 0
// After automatic mode MFF was enabled for VLAN 100, MFF notified DHCP to apply an ACL to
network port Ethernet 1/2 to permit DHCP packets. The apply operation was successful.
*Apr 26 16:30:21:592 2000 Sysname MFF/7/Debug_MFF_Event:
MFF Event:
Notify DRV ACL rule:
Interface name: Ethernet1/2, VlanId: 100,
Port type: NETWORK, Option type: ADD,
Rule type: BROADCAST DENY, Return Value: 0
// After automatic mode MFF was enabled for VLAN 100, MFF notified the driver to apply an ACL to
network port Ethernet 1/2 to deny multicast packets. The apply operation was successful.
*Apr 26 16:30:21:602 2000 Sysname MFF/7/Debug_MFF_Event:
MFF Event:
Notify DRV ACL rule:
Interface name: Ethernet1/2, VlanId: 100,
Port type: NETWORK, Option type: ADD,
Rule type: MULTICAST PERMIT, Return Value: 0
// After automatic mode MFF was enabled for VLAN 100, MFF notified the driver to apply an ACL to
network port Ethernet 1/2 to permit multicast packets. The apply operation was successful.
*Apr 26 16:30:21:612 2000 Sysname MFF/7/Debug_MFF_Event:
MFF Event:
Notify MCM ACL rule:
Interface name: Ethernet1/2,
Option type: ADD, Return Value: 0
// After automatic mode MFF was enabled for VLAN 100, MFF notified MCM to apply an ACL to
network port Ethernet 1/2 to deliver ARP packets to the CPU. The apply operation was successful.
# Enable MFF error debugging on an MFF enabled device.
<Sysname> debugging mac-forced-forwarding error
<Sysname> terminal debugging
% Current terminal debugging is on
// MFF error debugging was enabled.
Error: MAC-forced forwarding is not enabled in the VLAN.
// Periodic gateway MAC probe cannot be enabled because MFF was not enabled.
# Enable MFF information debugging on an MFF enabled device.
19