HP Comware 5 Debug Manual Vol 3

QoS debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
NOTE:
Support for the following commands depends on the device model.
debugging dar
Use debugging dar to enable DAR debugging.
Use undo debugging dar to disable DAR debugging.
Syntax
debugging dar { all | error | event | packet }
undo debugging dar { all | error | event | packet }
Default
DAR debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of DAR debugging.
error: Debugging for DAR errors.
event: Debugging for DAR events.
packets: Debugging for DAR packets.
Usage guidelines
Table 1 describes output fields and messages for the debugging dar error command.
Table 156 Output from the debugging dar error command
Field
Description
Failed to copy the data of the packet
DAR failed to copy the data of the packet during protocol
recognition.
Table 2 describes output fields and messages for the debugging dar event command.
262