HP Comware 5 Debug Manual Vol 3

Default command level
2: System level
Parameters
all: All types of P2P debugging.
error: P2P error debugging.
event: P2P event debugging.
Usage guidelines
Table 4 describes output fields and messages for the debugging p2p error command.
Table 159 Output from the debugging p2p error command
Field
Description
Failed to parse the protocol string P2P failed to resolve the protocol string.
Failed to get statistics information. Zone: zone-id,
Protocol: protocol-id
P2P failed to obtain statistics about protocol
protocol-id in zone zone-id.
Failed to get the protocol Chinese description from
signature file
P2P failed to obtain the protocol description in
Chinese from the signature file.
Failed to get the protocol English description from
signature file
P2P failed to obtain the protocol description in English
from the signature file.
Invalid value of parameter(parameter-name)
The value for a parameter was invalid.
Parameters include:
• Starting position of the signature code.
• Offset of the signature code
•
Signature code length.
Failed to synchronize the number of recognized
packets
P2P failed to synchronize the number of recognized
packets to the data plane.
Failed to get the parameter(parameter-name) from
signature file
P2P failed to obtain a parameter from the signature
file.
Parameters include:
• Parent protocol of the signature file.
• Protocol version.
• Number of packets recognized.
• Length of packets recognized.
• Starting position of the signature code.
• Offset of the signature code.
• Signature code length.
• Signature code type.
Failed to synchronize the signature
P2P failed to synchronize the signature code to the
data plane.
Examples
# Enable P2P error debugging. The signature file meta.mtd became invalid because it was modified by
the user without permission. When the modified signature file meta.mtd is loaded, output similar to the
following example is generated:
<Sysname> debugging p2p error
264