HP Comware 5 Debug Manual Vol 3

<Sysname>
*Dec 6 20:11:56:343 2007 Sysname P2P/7/P2P_Error:
Invalid signature file content.
// Contents of the signature file were invalid.
# Enable P2P event debugging when no protocol group exists on the device. Output similar to the
following example is generated when a user performs these tasks:
•
Creates protocol group 64.
•
Adds protocol 1, protocol 2, protocol 3, and protocol 4 to protocol group 64.
<Sysname> debugging p2p event
<Sysname>
*Dec 10 14:58:49:844 2007 Sysname P2P/7/P2P_Event:
The protocol group 64 does not exist.
// Protocol group 64 did not exist.
*Dec 10 14:58:50:141 2007 Sysname DP_P2P/7/P2P_Event:
Start to set protocol group.
*Dec 10 14:58:50:141 2007 Sysname DP_P2P/7/P2P_Event:
Succeeded in adding protocol 1 to protocol group 64.
// P2P started to set the protocol group. P2P added protocol 1 to protocol group 64.
*Dec 10 14:58:50:141 2007 Sysname DP_P2P/7/P2P_Event:
Start to set protocol group.
*Dec 10 14:58:50:141 2007 Sysname DP_P2P/7/P2P_Event:
Succeeded in adding protocol 2 to protocol group 64.
// P2P started to set the protocol group. P2P added protocol 2 to protocol group 64.
*Dec 10 14:58:50:141 2007 Sysname DP_P2P/7/P2P_Event:
Start to set protocol group.
*Dec 10 14:58:50:141 2007 Sysname DP_P2P/7/P2P_Event:
Succeeded in adding protocol 3 to protocol group 64.
// P2P started to set the protocol group. P2P added protocol 3 to protocol group 64.
*Dec 10 14:58:50:141 2007 Sysname DP_P2P/7/P2P_Event:
Start to set protocol group.
*Dec 10 14:58:50:141 2007 Sysname DP_P2P/7/P2P_Event:
Succeeded in adding protocol 4 to protocol group 64.
// P2P started to set the protocol group. P2P added protocol 4 to protocol group 64.
*Dec 10 14:58:50:141 2007 Sysname P2P/7/P2P_Event:
Succeeded in creating protocol group 64.
// P2P succeeded in creating protocol group 64.
debugging qos all
Use debugging qos all to enable all types of QoS debugging.
Use undo debugging qos all to disable all types of QoS debugging.
Syntax
debugging qos all
undo debugging qos all
265